Pipette tips are disposable plastic cones, designed to fit on pipettes, to transfer a precise volume of liquid.
移液頭是一次性塑料錐體，安裝在移液器上，以轉移精確容量的液體。
?Differentsizes : from 10 μL (? ~3mm * ~30mm) to 1500 μL (? ~10mm * ~100mm)
?Lightweight: Between 0,1g and 1g
?Wall thickness in general 0.3mm
?尺寸：從10μL（?~3mm*~30mm）到1500μL（?~10mm*~100mm）
?重量：0.1g至1g之間
?壁厚一般為0.3mm
Machine technology related/機器技術相關
01
Typical mould sizes (200μl tip)
16cav – IntElect2 S 100 – cycle times 4s+
32cav – IntElect2 S 130 – cycle times 4s+
64cav – IntElect2 S 180 – cycle time 4s+
128cav – El-Exis SP 300 – cycle time 4s+
Injection unit depending on pipette tip design.
Average screw size 45mm with L/D 20 (200μl & 64cav.).
典型模具尺寸(200μl 尖頭)
16腔 – IntElect2 S 100 – 循環時間 4s+
32腔 – IntElect2 S 130 – 循環時間 4s+
64腔 – IntElect2 S 180 – 循環時間 4s+
128腔 – El-Exis SP 300 – 循環時間 4s+
注射單元取決于移液頭的設計。
平均螺桿尺寸 45mm，長徑比 20 (200μl & 64cav.)。
02
Direct drive technology
?Stroke normally low (0.3 to 1D)
?Fast acceleration à Fast injection à No stress to the material ?Low runout tolerance in all cavities
?Fast cycle time
直驅技術
?行程通常較短 (0.3 to 1D)
?快速加速＞快速注射＞ 材料無應力
?所有型腔的公差跳動小
?快速循環時間
03
Energy consumption [kW/h]
Typical application for 64cav.tips :
?180t, SC 40mm
?Shot weight 16g
?Cycle 5 sec
能耗 [kW/h]
64腔移液頭的典型應用:
?180t, SC 40mm
?注射重量16克
?周期 5s
IntElect 2 is also up to 80% more efficient than hydraulic machines for pipette tips !/IntElect 2生產移液頭的效率比液壓機高出 80%！
04
Machine layout/機器布局
Our advantages-Services and Comzzpetences/我們的優勢——服務與能力
Risk reduction for our customers
為客戶降低風險
?Selection of partners to support complex applications (Production cells)
?Setup of Traceability Matrix / Change log
?Ergocheck (Calibration of the machine)
?Extended support during FAT/SAT with GMP trained personnel
?選擇合作伙伴以支持復雜的應用（生產單元）
?建立可追溯性矩陣/更改日志
?Ergocheck（機器校準）
?在 FAT/SAT 期間由經過 GMP 培訓的人員提供擴展支持
18221259202